***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 9:03 pm


Board index » Instrument Restoration and Repair

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
the_doc735
PostPosted: Thu Oct 08, 2020 4:42 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 25, 2020 11:25 am
Posts: 46
Location: UK
First name: paul
Last Name: staples
City: Hull
State: east yorkshire
Zip/Postal Code: HU94QF
Country: United Kingdom
Focus: Repair
Status: Amateur
how to shine/polish a guitar table after sanding with 1000grit paper?

I just dropped some black super glue on the table of my PRS SE, rubbing alcohol didn't even touch it! Neither did 2500 grit paper so I used 1000 grit paper which removed the glue but has left the surface dull/rough/matt, and the shine has gone!

Is there a way to restore the shine without clear coating the whole thing?

I tried some D'Addario PW-PL-02S Liquid Carnauba with a microfibre cloth without much success, but I only did it briefly!

many thanks!

_________________
drugstoredir2014.com
Top
 Profile  
 
Glen H
PostPosted: Thu Oct 08, 2020 5:07 pm 
Offline
Koa
Koa

Joined: Mon Jul 11, 2005 5:17 am
Posts: 1011
Location: United States
City: Tyler
State: Texas
Go back to your 2500 grit and work the area. You may need to use some interim grits. Then work it with rubbing compound then polishing compound


These users thanked the author Glen H for the post: the_doc735 (Fri Oct 09, 2020 6:21 pm)
Top
 Profile  
 
Freeman
PostPosted: Thu Oct 08, 2020 6:12 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
What Glen says. Go back up the grits from 1000 - 1200, 1500, 2000 and your 2500 (wet). Then polish with a good compound (I use Meguiers #2 and 3) without wax or silicon.


These users thanked the author Freeman for the post: the_doc735 (Fri Oct 09, 2020 6:21 pm)
Top
 Profile  
 
the_doc735
PostPosted: Sun Oct 11, 2020 11:11 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 25, 2020 11:25 am
Posts: 46
Location: UK
First name: paul
Last Name: staples
City: Hull
State: east yorkshire
Zip/Postal Code: HU94QF
Country: United Kingdom
Focus: Repair
Status: Amateur
I'm getting these:
https://www.ebay.co.uk/itm/K2-GOLD-LUSTER-Q5-FINE-CUT-Compound-Polishing-Car-Paint-Acrylic-NO-SWIRLS-Gloss/162466877160?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
https://www.premiumhobbies.co.uk/polish-wax/foam-polishing-pad-kit

_________________
drugstoredir2014.com
Top
 Profile  
 
Barry Daniels
PostPosted: Sun Oct 11, 2020 5:36 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
That is a very fine compound and might not be enough to get out 1000 grit, or finer, scratches. You might want to start with a more aggressive cutting compound.


These users thanked the author Barry Daniels for the post: the_doc735 (Mon Oct 12, 2020 2:54 pm)
Top
 Profile  
 
the_doc735
PostPosted: Tue Oct 13, 2020 8:55 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 25, 2020 11:25 am
Posts: 46
Location: UK
First name: paul
Last Name: staples
City: Hull
State: east yorkshire
Zip/Postal Code: HU94QF
Country: United Kingdom
Focus: Repair
Status: Amateur
Barry Daniels wrote:
That is a very fine compound and might not be enough to get out 1000 grit, or finer, scratches. You might want to start with a more aggressive cutting compound.


What would you suggest please?
thanks!

_________________
drugstoredir2014.com
Top
 Profile  
 
Barry Daniels
PostPosted: Tue Oct 13, 2020 9:12 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
There are a lot of compounds that would work, but this is my preference:

https://www.amazon.co.uk/Meguiars-Mirror-Glaze-Ultra-Cut-Compound/dp/B01LRHDOUC/ref=sr_1_1?dchild=1&keywords=meguiars+105&qid=1602598287&quartzVehicle=106-1339&replacementKeywords=meguiars&sr=8-1


These users thanked the author Barry Daniels for the post: the_doc735 (Wed Oct 14, 2020 4:07 am)
Top
 Profile  
 
the_doc735
PostPosted: Thu Oct 22, 2020 5:17 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 25, 2020 11:25 am
Posts: 46
Location: UK
First name: paul
Last Name: staples
City: Hull
State: east yorkshire
Zip/Postal Code: HU94QF
Country: United Kingdom
Focus: Repair
Status: Amateur
I used 1500, 2000, 2500 papers and these:

https://www.ebay.co.uk/itm/K2-GOLD-LUST ... 2749.l2649

https://www.premiumhobbies.co.uk/polish ... ng-pad-kit

It worked very well!

Many thanks for all your guidance, much appreciated to everybody here.

_________________
drugstoredir2014.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Instrument Restoration and Repair

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com